Woodcraft of Wilmington

551_teens/young_adult_class.jpg

$200.00

Beginner

Intro: Dimension Lumber: Making a Charcuterie Board

with Danielle Newman

Sunday, March 22, 2026, 11 AM - 3:30 PM

Required Tools

In this class we will go over the safety and process of all the tools needed for class. You will leave with the understanding of how to make dimension lumber work for your project. We will be making a basic charcuterie board that you get to leave with finished at the end of this class. Students must be over 13 years old, with an accompanied adult over 18 years of age.

551_table.png

$125.00

All Levels

Router Table Basics

with Bill Campbell

Wednesday, March 25, 2026, 12 PM - 3 PM

Required Tools

Build on the Router Basics course and use the router table with ease. We will discuss and understand all the settings and capabilities of this versatile tool. You will setup and create rabbets, dadoes, and edge profiles to perfection. Even on non-regular shapes. You will also practice a stop cut, sliding dovetails and tongue and groove joinery.

551_carving.jpg

$140.00

Beginner

Carving For Beginners

with Liesa Burdeshaw

Saturday, March 28, 2026, 10 AM - 2 PM

Get started carving with a simple cowboy boot! Learn the basics, how to hold your tools and what they are called, how to sharpen and how best to tackle a new project. You will need a cut resistant glove and a thumb guard. Students must be at least 13 years old and accompanied by an adult over 18 years of age.

551_scrapwoodc.jpg

$0.00

All Levels

Scrap Wood Challenge

with Store

Saturday, April 11, 2026, 12 PM - 4 PM

Put Your Skills to the Test in Our Scrap Wood Challenge! Calling all makers! It’s time to dig into that scrap pile and get creative. Build anything you want using any fastener—screws, nails, staples, dowels… your choice! The only rules: Your project must be fully finished (paint, stain, oil—your call) It must fit within 18" x 18" And of course… it must be made from scrap wood and a picture of the scrap wood pile that you will be using must be emailed to our store. Bring your completed creation to Woodcraft Delaware to show off your craftsmanship and compete for bragging rights (and maybe a prize or two!). Whether you’re a beginner or a seasoned woodworker, this is the perfect chance to have fun, challenge yourself, and inspire others. Ready to join the fun? Start building!

551_tsw.jpg

$125.00

All Levels

Table Saw Basics

with Bill Campbell

Wednesday, April 15, 2026, 12 PM - 3 PM

Required Tools

This course will review the features of the safest saw in the world-Sawstop! Instruction will also cover the major parts of any table saw and how to fine tune one. Bill will also discuss the different blade descriptions and their applications along with other helpful accessories. Finally, demonstration with hands-on practice to stay safe while using the work horse of any shop. A small box will be completed by every student.

551_spooncarving.jpg

$140.00

Beginner/Intermediate

Spoon Carving

with Liesa Burdeshaw

Saturday, April 18, 2026, 10 AM - 2 PM

Required Tools

Learn the basics of carving spoons. How to gouge out the bowl, how to slim down the handle and make simple yet useful flourishes for your simple basswood spoon.

$210.00

Beginner

Woodturning - Bowl Basics and more

with Chuck Engstrom

Saturday, May 2, 2026, 9:30 AM - 4:30 PM

Required Tools

Learn with Chuck Engstrom - professional turner -how to prepare and mount a blank, size a tenon, chuck mounting, rough vs. finishing cuts with a "fingernail" bowl gouge. Then, reverse mounting, hollowing with gouges and scrapers and tricks for finishing the base. With Chuck's guidance you'll soon be turning out elegant bowls. After lunch, you will have an opportunity to apply the basics covered in the morning session and enhance your skills. Learn even more techniques for added control with the versatile bowl gouge. You practice hollowing methods needed when forming an inward turned rim.

551_route.jpg

$125.00

All Levels

Router Basics

with Bill Campbell

Wednesday, May 6, 2026, 12 PM - 3 PM

Required Tools

Find out what a router can do! Almost anything with the help of a jig! Have one? Bring it. We will discuss the features and how to setup any router. Router bit characteristics, categories and how to safely use them will be demonstrated. Half of this class is dedicated to the students to get hands-on practice to gain confidence while using this machine. You will be able to free hand your own name!

551_table.png

$125.00

All Levels

Router Table Basics

with Bill Campbell

Wednesday, May 13, 2026, 12 PM - 3 PM

Required Tools

Build on the Router Basics course and use the router table with ease. We will discuss and understand all the settings and capabilities of this versatile tool. You will setup and create rabbets, dadoes, and edge profiles to perfection. Even on non-regular shapes. You will also practice a stop cut, sliding dovetails and tongue and groove joinery.

551_carving.jpg

$140.00

Beginner

Carving For Beginners

with Liesa Burdeshaw

Saturday, May 23, 2026, 10 AM - 2 PM

Get started carving with a simple cowboy boot! Learn the basics, how to hold your tools and what they are called, how to sharpen and how best to tackle a new project. You will need a cut resistant glove and a thumb guard. Students must be at least 13 years old and accompanied by an adult over 18 years of age.

551_tsw.jpg

$125.00

All Levels

Table Saw Basics

with Bill Campbell

Wednesday, June 17, 2026, 12 PM - 3 PM

Required Tools

This course will review the features of the safest saw in the world-Sawstop! Instruction will also cover the major parts of any table saw and how to fine tune one. Bill will also discuss the different blade descriptions and their applications along with other helpful accessories. Finally, demonstration with hands-on practice to stay safe while using the work horse of any shop. A small box will be completed by every student.

551_Liesamushroom.jpg

$140.00

Beginner/Intermediate

Sculpture Carving: Mushroom

with Liesa Burdeshaw

Saturday, June 20, 2026, 10 AM - 2 PM

Required Tools

Learn the basics of sculpture carving. You will design and carve your own mushroom out of basswood.

551_teens/young_adult_class.jpg

$200.00

Beginner

Intro: Dimension Lumber: Making a Charcuterie Board

with Danielle Newman

Sunday, June 28, 2026, 11 AM - 3:30 PM

Required Tools

In this class we will go over the safety and process of all the tools needed for class. You will leave with the understanding of how to make dimension lumber work for your project. We will be making a basic charcuterie board that you get to leave with finished at the end of this class. Students must be over 13 years old, with an accompanied adult over 18 years of age.

551_route.jpg

$125.00

All Levels

Router Basics

with Bill Campbell

Wednesday, July 8, 2026, 12 PM - 3 PM

Required Tools

Find out what a router can do! Almost anything with the help of a jig! Have one? Bring it. We will discuss the features and how to setup any router. Router bit characteristics, categories and how to safely use them will be demonstrated. Half of this class is dedicated to the students to get hands-on practice to gain confidence while using this machine. You will be able to free hand your own name!

$210.00

Beginner

Woodturning - Bowl Basics and more

with Chuck Engstrom

Saturday, July 11, 2026, 9:30 AM - 4:30 PM

Required Tools

Learn with Chuck Engstrom - professional turner -how to prepare and mount a blank, size a tenon, chuck mounting, rough vs. finishing cuts with a "fingernail" bowl gouge. Then, reverse mounting, hollowing with gouges and scrapers and tricks for finishing the base. With Chuck's guidance you'll soon be turning out elegant bowls. After lunch, you will have an opportunity to apply the basics covered in the morning session and enhance your skills. Learn even more techniques for added control with the versatile bowl gouge. You practice hollowing methods needed when forming an inward turned rim.

551_carving.jpg

$140.00

Beginner

Carving For Beginners

with Liesa Burdeshaw

Saturday, July 18, 2026, 10 AM - 2 PM

Get started carving with a simple cowboy boot! Learn the basics, how to hold your tools and what they are called, how to sharpen and how best to tackle a new project. You will need a cut resistant glove and a thumb guard. Students must be at least 13 years old and accompanied by an adult over 18 years of age.

551_table.png

$125.00

All Levels

Router Table Basics

with Bill Campbell

Wednesday, July 22, 2026, 12 PM - 3 PM

Required Tools

Build on the Router Basics course and use the router table with ease. We will discuss and understand all the settings and capabilities of this versatile tool. You will setup and create rabbets, dadoes, and edge profiles to perfection. Even on non-regular shapes. You will also practice a stop cut, sliding dovetails and tongue and groove joinery.

$210.00

Beginner

Woodturning - Bowl Basics and more

with Chuck Engstrom

Saturday, September 5, 2026, 9:30 AM - 4:30 PM

Required Tools

Learn with Chuck Engstrom - professional turner -how to prepare and mount a blank, size a tenon, chuck mounting, rough vs. finishing cuts with a "fingernail" bowl gouge. Then, reverse mounting, hollowing with gouges and scrapers and tricks for finishing the base. With Chuck's guidance you'll soon be turning out elegant bowls. After lunch, you will have an opportunity to apply the basics covered in the morning session and enhance your skills. Learn even more techniques for added control with the versatile bowl gouge. You practice hollowing methods needed when forming an inward turned rim.

551_Alex_Snodgrass.jpg

$335.00

All Levels

Build A Pin Box and Two-Drawer Wave Box

with Alex Snodgrass

Saturday, September 12, 2026, 9 AM - 3:30 PM

Renowned bandsaw master Alex Snodgrass will lead a hands-on class devoted to building two striking projects: a four-drawer pin box and a two-drawer wave box. Instruction covers setup, cutting techniques and safe shaping methods while Alex guides participants step by step and answers questions throughout the process. He also reveals the secrets behind his signature designs, including magnetic boxes, push button boxes, the gravity pin box and an articulated snake. Additionally, participants will receive exclusive access to a private video showcasing the completed projects, extending the learning beyond the classroom. By the end of the day, students not only complete two boxes but also gain the rare chance to learn directly from a legend in the craft, leaving with the skills and confidence to create almost any style of bandsaw box. Secure your spot TODAY. Class size is limited to 10.

551_tsw.jpg

$125.00

All Levels

Table Saw Basics

with Bill Campbell

Wednesday, September 16, 2026, 12 PM - 3 PM

Required Tools

This course will review the features of the safest saw in the world-Sawstop! Instruction will also cover the major parts of any table saw and how to fine tune one. Bill will also discuss the different blade descriptions and their applications along with other helpful accessories. Finally, demonstration with hands-on practice to stay safe while using the work horse of any shop. A small box will be completed by every student.

551_spooncarving.jpg

$140.00

Beginner/Intermediate

Spoon Carving

with Liesa Burdeshaw

Saturday, September 26, 2026, 10 AM - 2 PM

Required Tools

Learn the basics of carving spoons. How to gouge out the bowl, how to slim down the handle and make simple yet useful flourishes for your simple basswood spoon.

551_route.jpg

$125.00

All Levels

Router Basics

with Bill Campbell

Wednesday, October 7, 2026, 12 PM - 3 PM

Required Tools

Find out what a router can do! Almost anything with the help of a jig! Have one? Bring it. We will discuss the features and how to setup any router. Router bit characteristics, categories and how to safely use them will be demonstrated. Half of this class is dedicated to the students to get hands-on practice to gain confidence while using this machine. You will be able to free hand your own name!

551_table.png

$125.00

All Levels

Router Table Basics

with Bill Campbell

Wednesday, October 21, 2026, 12 PM - 3 PM

Required Tools

Build on the Router Basics course and use the router table with ease. We will discuss and understand all the settings and capabilities of this versatile tool. You will setup and create rabbets, dadoes, and edge profiles to perfection. Even on non-regular shapes. You will also practice a stop cut, sliding dovetails and tongue and groove joinery.

$210.00

Beginner

Woodturning - Bowl Basics and more

with Chuck Engstrom

Saturday, November 7, 2026, 9:30 AM - 4:30 PM

Required Tools

Learn with Chuck Engstrom - professional turner -how to prepare and mount a blank, size a tenon, chuck mounting, rough vs. finishing cuts with a "fingernail" bowl gouge. Then, reverse mounting, hollowing with gouges and scrapers and tricks for finishing the base. With Chuck's guidance you'll soon be turning out elegant bowls. After lunch, you will have an opportunity to apply the basics covered in the morning session and enhance your skills. Learn even more techniques for added control with the versatile bowl gouge. You practice hollowing methods needed when forming an inward turned rim.

551_teens/young_adult_class.jpg

$200.00

Beginner

Intro: Dimension Lumber: Making a Charcuterie Board

with Danielle Newman

Sunday, December 27, 2026, 11 AM - 3:30 PM

Required Tools

In this class we will go over the safety and process of all the tools needed for class. You will leave with the understanding of how to make dimension lumber work for your project. We will be making a basic charcuterie board that you get to leave with finished at the end of this class. Students must be over 13 years old, with an accompanied adult over 18 years of age.